Flat Tire Repair Fix Burlingame
Flat Tire Fix Repair Services: Shaffer’s Tire & Auto Repair
Flat tires are caused by many things, but one reason is incorrect tire pressure. Tire pressure above the level suggested by your manufacturer will lead to slight bouncing as you drive, which in turn will weaken traction a nd increase your chances of hitting an obstacle in the road that may puncture your tire. When tire pressure is too low, more of your tire touches the road. This increases friction, which could make your tires overheat and lead to a blowout. Another reason for a flat tire could be a damaged valve stem, the component that allows the tire to be filled with air.
Your tires may also be worn, allowing air to leak out. All of these conditions could lead to a flat tire while driving.
We service the Flat Tire needs of customers in Burlingame, San Mateo & and the surrounding areas.
Call us: 650-344-0302
Flat Tire Repair Rates:
$40 for regular tires under 20″
$50 for tires over 20″ and run-flats
How To Fix A Flat Tire: Burlingame Millbrae San Mateo
Step By Step Instructions
Shaffer’s Tire & Auto Repair
A flat tire problem drivers face on occasion. You should know about how to fix a flat tire on a car because a good spare may not be available.
There are a few ways for flat tire repair, and most of them are pretty straightforward and don’t require more than a few tools.
How to Fix a Flat Tire: Step by Step Instructions
Having a punctured or flat tire is an annoying problem. However, as it happens now and again, you should learn a way or two about how to fix the problem. Let’s take a look at how to fix a flat tire on a car by using a tire plug kit:
1. Find the Leak
It’s the first step. Take a close look at the tire to see if there’s a nail or something sharp sticks out of it or if there’s any holes or cuts. If the visible inspection does not help, inflate the tire to the appropriate pressure level and see if there’s a hissing sound. Or mix some dish soap with water and brush or spray the mixture on the tire. There will be bubbles on the leaking area. Mark the spot with tape.
2. Loosen the Lug Nuts and Jack the Car up
You have to loosen the lug nuts with an impact wrench or a lug wrench. Remember to do it before jacking up the car. Otherwise, it can spin dangerously at the time of removing the nuts. Now, it’s time to jack up the car so that you can remove the wheels. Do it by keeping your car on a concrete or hard surface and must use jack stands to keep the vehicle stabilized.
3. Remove the Lug Nuts and Clean the Hole
It’s time to remove the lug nuts completely and pull off the wheel of the wheelbase. After that, clean the leaking area by inserting the rasp tool (included in the kit) in an out of the hole a few times.
How to driving on a flat tire in a short distance?
How long can you drive on a flat tire?
4. Insert the Plug
Thread the plug at the middle of the insertion tool and push into the hole. You can lubricate the plug with an adhesive such glue or rubber cement for easy insertion and a better seal. Don’t move the plug at least for one minute to let the adhesive set and dry. Cut out the part of the plug protruding from the tire surface.
5. Inflate the Tire
Fill the tire with air at the recommended air pressure. Now, re-install the wheel, remove the floor jack, and attach and tighten the lugs to the proper torque.
As you have learned how to fix a flat tire on a car, you can carry out the entire process at your home. However, remember that repairing a tire using a plug is not a permanent solution. You should take the tire to an auto repair shop for patching it up professionally or replace it before driving it for another 20,000 miles.
Guide to replace a flat tire
If fixing a flat tire is not an effective way for you in this situation, next solution you should think about is replacing your flat tire. Here are 2 steps to help you do this:
Step 1: Removing the flat tire
The first thing you need in this step is a lug wrench for loosening the lug nuts on your flat tire. After you loosen all the nuts (but do not remove them yet), next is situating a car jack to the suggested jacking points for your car, then use this jack to up the car side that you are working on. Also to prevent your car from rolling, you must do this on level ground. Bear in mind that jacking your car on a slope can cause many dangerous accidents. After jacking up your car, it’s time for you to remove the lug nuts, then take the flat tire off.
Step 2: Attaching the spare
Using the spare wheel to replace the flat tire. Before attaching the spare, you should spend a couple of minutes to check the condition of the spare again, make sure that it has the same size with the one you are replacing. Why do you have to do this? Well, driving on a car with 3 summer tires and 1 winter tire for any significant period of time will cause many annoying troubles, that is what we don’t want to face.
When checking the spare wheel is done, next to do is reattaching the lug nuts to the bolts (but do not fully them). Then you lower the car jack until all the weight of the vehicle is back on the tire. Next is removing the car jack and locking down the lug nuts. Notice: Although you can drive your beloved car again with a spare wheel, the spare is not manufactured for long driving purpose. Therefore, you should drive your car under 50 mph when using a temporary spare and seeking for a auto repair shop to get a tire replaced by a mechanic.
Hopefully after reading this article, besides knowing about fixing a flat tire instructions, you will get to know how to replace a flat tire in a safe way. If you have any questions related to how to fix a flat tire or car knowledge, feel free to leave us a comment below, our auto experts will answer it for you. 
Types of Tire & Puncture Repairs
A puncture is no match for our experts as they ensure that every puncture repair is carried out to a safe standard.
We know how frustrating it is to get an unexpected tire puncture, which is why we’ve made our tire puncture repair service as easy and as convenient to use as possible so you’re never left stranded.
How we repair a punctured or flat tire
Before every puncture repair, we check for secondary damage including deformed bead wires, rubber or tread separations, deterioration caused by grease or corrosive fluid (or age), marking of the interior rubber and any checks for all other signs of excessive wear to ensure that a safe puncture repair can be carried out.
If your tire cannot be repaired we will not carry out any work. If a tire is deemed to be unsafe for repair, or if there is any doubt as to its condition, then we will be unable to repair the tire and will recommend that it is replaced.
Below are some of the reasons why we may be unable to repair a tire:
The bead wire is damaged or visible
The tread or the rubber has separated
The tire has deteriorated due to leaking fluid
The tire has sustained irreparable damage
The depth of the tread is too worn
There are indications that the internal sidewalls have been subjected to overheating
The safety concerns and reasoning behind our technician’s advice will be explained to you at the time of the tire inspection. If your tire can not be safely repaired, our expert technicians can provide recommendations for replacement tires to suit your car, needs and budget.
Can you repair runflat tires?
We will repair runflat tires whenever possible without comprising your safety, by carefully assessing individual tires for problems caused by damage and age. Unfortunately, not all runflat tires are repairable as damage on the reinforced sidewalls can be concealed and as such, a decision about repairing or replacing runflat tires will be made by our qualified and experienced technicians.
Call us: 650-344-0302